Floating caliper brakes as a compact type are executed as a one-sided actuator design. They serve for generating a brake force on a brake disk in order to decelerate a plant’s movement resp. stop it or keep it at standstill. Floating caliper brakes operate free from axial forces. They prevent damages on the drive train reliably, even if there is an incorrect setting or an error in the installation.
Connection immediately on the gearbox is possible.
The passive KTR-STOP brakes are spring-actuated, hydraulic floating caliper brakes having the benefit to operate free from axial forces.
This prevents damage on the drive train, even if there is an incorrect setting or an error in the installation.
Depending on the size, the KTR-STOP brakes are used as service brakes, holding brakes or safety brakes.
The passive floating caliper brakes EMB-STOP are spring-actuated, electromechanical brakes and brake systems.
EMB-STOP electrical brake and braking systems stand out thanks to their high reliability and efficiency.
The passive electrical floating caliper brakes are a flexible and clean solution for an extremely long service life with low operating costs and the highest possible level of system reliability.
The application fields of our passive spring-actuated floating caliper brake EMB-STOP:
The passive electromechanical brakes are highly suitable if fast response times are required and loads need to be absorbed in an emergency. As spring-actuated and electrically released brakes, they are used in particular as emergency stop brakes and emergency brakes.
The active KTR-STOP brakes are hydraulically applied floating caliper brakes provinding the benefit to operate nearly free from axial forces.
This prevents damage on the drive train, even if there is an incorrect setting or an error in the installation.
Depending on the size KTR-STOP brakes are used as service brakes or holding brakes.
Depending on the size the EMB-STOP brakes are used as a parking brake, holding brake or maintenance brake.